Re: How to use Entropy to access the Freenet resources?

[ Entropy Forum ]

Geschrieben von / Written by DigitalPig am 08. Juni 2007 02:42:12:

Als Antwort auf: / as an answer to: How to use Entropy to access the Freenet resources? geschrieben von / written by DigitalPig am 07. Juni 2007 20:23:26:

I found the problem. My computer found the peers. But only the outgoing data stream. And it is very low. Currently I am inside one campus. I have static IP. But I still can't find any files with any key, even the KSK@gsl2.txt this one. I pasted the log file here. Could someone help to solve that? Thanks! My computer is Windows XP.

00:17:22.265:2:{5944}:main(src/entropy.c:265): ****** startup ******
00:17:22.585:2:{5944}:main(src/entropy.c:271): # 1: reading configuration
00:17:22.640:2:{5944}:main(src/entropy.c:280): # 2: init proc
00:17:22.753:2:{5944}:main(src/entropy.c:289): # 3: init temp
00:17:22.757:2:{5944}:main(src/entropy.c:298): # 4: init fec
00:17:23.209:2:{5944}:main(src/entropy.c:307): # 5: init crypto
00:17:23.941:2:{5944}:main(src/entropy.c:316): # 6: init RSA
00:17:24.029:2:{5944}:main(src/entropy.c:325): # 7: init store
00:17:24.449:2:{5944}:store_put_version(src/store.c:256): old destination fingerprint: 0a000000054300000c0a03f80400fa0a [0x26]
00:17:24.451:2:{5944}:store_put_version(src/store.c:311): maxima 2 0x004800
00:17:24.452:2:{5944}:store_put_version(src/store.c:362): new destination fingerprint: 00080d000c45000000000ffc0100f900 [0x26]
00:17:24.455:2:{5944}:store_purge(src/store_tree.c:746): *** nothing to do: currsize 0MB < storesize 1024MB
00:17:24.456:2:{5944}:store(src/store_tree.c:1364): Opened 0MB [1024MB] 2-level store with 6 keys
00:17:24.457:2:{5944}:main(src/entropy.c:334): # 8: init peer
00:17:26.737:1:{5944}:peer(src/peer.c:8748): hostname 'UNKNOWN' does not resolve (Unknown host)
00:17:26.739:2:{5944}:peer(src/peer.c:8828): bandwidth limits in: 76800, out: 25600
00:17:28.049:1:{5944}:peer_seednodes(src/peer.c:8707): hostname 'downgrade.hacklabs.org' does not resolve (No address associated with name)
00:17:28.234:1:{5308}:sock_incoming(src/sock.c:506): listening on 0.0.0.0:37373
00:17:30.439:1:{5944}:peer_seednodes(src/peer.c:8707): hostname 'nop.zapto.org' does not resolve (Unknown host)
00:17:30.443:2:{5944}:main(src/entropy.c:343): # 9: init client
00:17:30.606:2:{5944}:main(src/entropy.c:352): #10: init i18n
00:17:30.725:2:{5944}:i18n_add_lang(src/i18n.c:176): Loaded l10n for lang 'de'
00:17:30.728:2:{5944}:main(src/entropy.c:361): #11: init mime_types
00:17:30.734:1:{248}:sock_incoming(src/sock.c:506): listening on 127.0.0.1:8482
00:17:31.042:2:{5944}:main(src/entropy.c:370): #12: init news
00:17:31.097:2:{5944}:main(src/entropy.c:379): #13: init unicode
00:17:31.152:2:{5944}:main(src/entropy.c:388): #14: init gif
00:17:31.171:2:{5944}:main(src/entropy.c:397): #15: init png
00:17:31.178:2:{5944}:main(src/entropy.c:406): #16: init proxy
00:17:31.237:2:{5944}:main(src/entropy.c:414): ****** complete ******
00:17:31.297:1:{4256}:sock_incoming(src/sock.c:506): listening on 127.0.0.1:9999
00:18:20.534:2:{4984}:peer_out_setup(src/peer.c:5941): connection setup to 139.30.40.164:37374/lorenz succeeded
00:18:26.053:2:{5092}:peer_out_setup(src/peer.c:5941): connection setup to 212.168.170.249:37373/lorenz succeeded
00:18:41.914:2:{3660}:peer_out_setup(src/peer.c:5941): connection setup to 69.51.152.43:37373/lorenz succeeded
00:18:52.149:2:{5736}:peer_out_setup(src/peer.c:5941): connection setup to 62.4.74.167:37373/lorenz succeeded
00:18:57.488:2:{3720}:peer_out_setup(src/peer.c:5941): connection setup to 24.113.134.49:37373/lorenz succeeded
00:19:02.519:2:{5684}:peer_out_setup(src/peer.c:5941): connection setup to 190.44.158.241:43683/lorenz succeeded
00:19:08.525:2:{4904}:peer_out_setup(src/peer.c:5941): connection setup to 84.140.255.107:20202/lorenz succeeded
00:19:19.346:2:{4248}:peer_out_setup(src/peer.c:5941): connection setup to 139.30.40.30:37374/lorenz succeeded
00:19:43.275:2:{4704}:conf_update(src/config.c:1040): config file change detected (2007-06-08 00:19:42)
00:19:50.484:1:{4596}:osd_sem_wait(src/osd.c:803): fcntl(-1,01) failed (Bad file descriptor)
00:19:50.514:1:{248}:sock_incoming(src/sock.c:527): accept() call failed (Interrupted system call)
00:19:50.528:1:{2964}:peer_fec_worker(src/peer.c:8258): g_peer_fec_worker_pid is invalid (-1)
00:19:50.524:1:{4004}:main_exit(src/entropy.c:48): *** {4004} signal SIGHUP ***
00:19:50.524:2:{4704}:peer_exit(src/peer.c:8133): shutdown g_peer sems {4704} SIGHUP
00:19:50.524:1:{5308}:sock_incoming(src/sock.c:527): accept() call failed (Interrupted system call)
00:19:50.529:2:{5684}:peer_out_exit(src/peer.c:8037): shutdown peer 190.44.158.241:43683
00:19:50.517:1:{276}:peer_bwlimit(src/peer.c:7635): g_peer_bwlimit_pid is invalid (-1)
00:19:50.525:2:{5736}:peer_out_exit(src/peer.c:8037): shutdown peer 62.4.74.167:37373
00:19:50.559:1:{4704}:peer_threads(src/peer.c:8398): g_peer_threads_pid is invalid (-1)
00:19:50.533:2:{5092}:peer_out_exit(src/peer.c:8037): shutdown peer 212.168.170.249:37373
00:19:50.531:2:{3720}:peer_out_exit(src/peer.c:8037): shutdown peer 24.113.134.49:37373
00:19:50.528:2:{4248}:peer_out_exit(src/peer.c:8037): shutdown peer 139.30.40.30:37374
00:19:50.520:2:{4984}:peer_out_exit(src/peer.c:8037): shutdown peer 139.30.40.164:37374
00:19:50.530:2:{3660}:peer_out_exit(src/peer.c:8037): shutdown peer 69.51.152.43:37373
00:19:50.528:2:{4904}:peer_out_exit(src/peer.c:8037): shutdown peer 84.140.255.107:20202
00:19:50.516:1:{4068}:peer_out(src/peer.c:6258): g_peer_out_pid is invalid (-1)
00:19:50.521:1:{4256}:sock_incoming(src/sock.c:527): accept() call failed (Interrupted system call)
00:19:50.592:1:{4068}:peer(src/peer.c:8849): peer_out() call failed (Interrupted system call)
00:19:51.503:1:{4596}:osd_sem_post(src/osd.c:857): fcntl(-1,01) failed (Bad file descriptor)

>Hi~ I am just starting to use ENTROPY. But I found that the author won't maintain this software anymore. And after I installed that, I find that some links, even "KSK@gpl2.txt" doesn't work. I find some peers connected to me. But how can I know if I installed the entropy correctly? And how can I use ENTROPY to download the resources in Freenet, since I can't install Freenet on my computer due to "System error 1067". Thanks!




Antworten: / Answers

[ Entropy Forum ]